Differences

This shows you the differences between two versions of the page.

--- software:eventsetup:teams [2022/03/17 07:47] – [One tag per team: Sum of best times] torben
+++ software:eventsetup:teams [2024/10/02 07:47] (current) – external edit 127.0.0.1
@@ Line 15: / Line 15: @@
 BBT can handle multiple types of "Team and relay". At the moment the following combinations are available.
 ===== Normal: Treat teams as individuals =====
 This is the default setting in the BBT timing software.
-Each team is treated as an individual, having it's own race number and tags. The team and it's members are completely independent and can race at the same time.
+Each team is treated as an individual, having it's own race number and tags. The team and it's members are completely independent and can race at the same time. The total time of the team is the sum of the individual time of each member.
-===== One tag per team (single tag/depeche relay) =====
+===== One tag per team (single tag/depeche) =====
-Each team share one chip/tag. This tag is passed  from one team member to the next each time one lap is completed. All members need to race one lap each, in the order they are listed on the team. This is a typical relay setup where a physical depeche (with one of more tags fitted) is passed from one member to the next, until all laps have been completed.
+Each team share one chip/tag. This tag is passed from one team member to the next each time one lap is completed. All members need to race one lap each, in the order they are listed on the team. This is a typical relay setup where a physical depeche (with one of more tags fitted) is passed from one member to the next, until all laps have been completed.
-All laps will be listed on the team entry, assigning the result of the first lap to the first member on the list and so forht.
+All laps will be listed on the team entry, assigning the result of the first lap to the first member on the list and so forth.
 **Setup:** The race has to be configured as a lap event with a lap count that matches the number of team members.
 //Note: The transition time between two team members can be computed if using one timing unit at the start and one timing unit at the finish.//
 ===== One tag per team member: Start and finish lines =====
-All members of the team have their own tag as if they were racing individually. However, only one is allowed to be on the course at any given time.
+All members of the team have their own tag as if they were racing individually. However, only one team member is allowed to be on the course at any given time.
-There are physical timing units in place for recording the start and finish times of each lap. When a given team member is racing, his/her time starts when crossing the start line and stops again when crossing the finish line. The participants may race in any order, and even multiple laps in a row for the same person.
+There must be physical timing units installed for recording the start and finish times of each lap. When a given team member is racing, his/her time is started when crossing the start line and stopped when crossing the finish line. It is okay for team members to race in any order and a member is allowed to do multiple laps in a row.
-The transition time to the next participant is included in the total team result, but not in the individual lap times.
+The transition time between two team members is included in the total result of the team but not in the individual lap times.
-**Setup:** The event has to be configured as a lap event with a Start timing point, and a Finish timing point for each lap. Any lap count/completion mode may be used.
+**Setup:** The event has to be configured as a lap event with a Start timing point, and a Finish timing point for each lap. Any lap count/completion mode can be used.
 {{:software:eventsetup:teammode-explicit-start.png|}}
 ===== One tag per team member: Finish line only =====
-This is similar to the above, except that there is not a timing unit to record the start times (and indirectly, the transition times). Only a single physical line exists, which is used to record the finish time of each lap.
+This is a simpler version of the "One tag per team member: Start and finish lines" type race as there is no timing unit recording the start times (and indirectly, the transition times). Only the finish time of each lap is recorded using a timing unit at the Finish line.
-Instead of having a physically recorded start time, the finish time of the previous team member is used as the start time for the next.
+Instead of having an actual recorded start time, the finish time of one team member automatically becomes the start time for the following member.
-**Setup:** The event has to be configured as a lap event with a Start timing point, and a Finish timing point for each lap. The Start point does not have to be tied to any timing unit/location, but needs to be present in order for the individual results to work properly. Any lap count/completion mode may be used.
+**Setup:** The event has to be configured as a lap event with a Start timing point, and a Finish timing point for each lap. The Start timing point must be present in order for the individual results to work properly. However, it does not have to be assigned any timing unit/location. Any lap count/completion mode may be used.
 {{:software:eventsetup:teammode-implicit-start.png|}}
 ===== One tag per team member: Sum of best times =====
-Each participant on the team have their own tag as if they were racing individually. They may start together or at different times.
+This is the setup for races where the total time of the team is calculated by adding the X best individual times. For example with a team of 4, the team result could be computed as the sum of the best 3 individual times.
-The team finish time is computed as the sum of the individual finish times of the X best team members. For example with a team of 4, the team result could be computed as the sum of the best 3.
+All team members have their own tag as if they were racing individually. They are allowed to start together or at different times.
-The team will only have finish times computed. Splits and laps will not be computed on the team.
+The team will only have finish times computed. Splits and laps will not be computed.
+**Setup:** Any regular race setup for individuals will work. As soon as the first X team members get a time, the team result will be computed from those.
 ===== Team Time Trial =====
-Example: A team of 4 riders start at the same time and the 3rd rider sets the team time. Both numbers are configurable.
+Time Trial where X team members have to pass a timing point for the team to obtain a time, and the best of the individual times becomes the team-time.
+Example: A team of four members start at the same time, three members have to pass the timing point for the team to obtain a time, and the third member is the fastest and sets the team time.  If the team does not have at least three members pass a timing point, the team will not get a time recorded at that point (including the finish line).
+All team members have their own tag, and will get their individual times recorded including splits, laps etc.
-Each team member have their own tag, and will get their individual times computed as usual, including splits, laps etc.
+To specify that the last team member counts, regardless of the team size (which might vary among the teams), set 0 as the parameter.
-The resulting team time will be the 3rd (or otherwise set) best time of the team members. This applies to not only the finish, but also any split or laps during the race. If the team does not have three riders passing a point, they will not get a time recorded at that point (including the finish line).
+Normally, all team members will have the exact same start time (i.e. wave start or fixed time trial start).
-To speficiy that the last rider counts, regardless of the team size (which might vary among the teams), set 0 as the parameter.
+**Setup:** Any regular race setup for individuals will work. As soon as the first X team members get a time, the team result will be computed from those.
-All riders will normally have the exact same start time (i.e. wave start or fixed time trial start).